One licensed source for your Division 10 fire protection specialties. We supply cabinets from the major manufacturers, turn around submittals fast, deliver to the jobsite, and set the extinguishers tagged and ready for final fire inspection.
Most supply houses stop at the box. We're a licensed extinguisher service company, so the scope doesn't fall through the cracks between rough-in and certificate of occupancy.
Cut sheets, rough-opening dimensions and fire-rating documentation packaged for your architect's review.
We'll quote the basis-of-design product, and offer an equal from another manufacturer when lead time or budget calls for it.
Cabinets delivered to your site, timed for rough framing so the openings are ready before drywall.
Amerex extinguishers set in every cabinet with a CSFM service tag, so you're covered at the fire marshal's final walk.
We're an authorized dealer for JL Industries and Potter Roemer, and we also supply Larsen's and Babcock-Davis. Tell us what's on the drawings. If a series isn't listed here, ask — we can usually source it.
A common basis-of-design brand for commercial, education and healthcare projects.
Architectural and specialty cabinets, including detention-grade units for secure facilities.
A deep catalog of door styles, from standard steel to frameless acrylic and brass.
Clean, contemporary lines with options from standard glass to full acrylic doors.
Other manufacturers available on request. Product names and trademarks belong to their respective owners; series availability and options are subject to the manufacturer's current catalog.
Wall depth, corridor width and fire rating decide which style works. We'll confirm rough-opening sizes against your wall assembly before ordering.
Hangs on the finished wall. For existing or shallow walls, or where openings weren't framed.
Partly in the wall, with a shallow projection. The go-to in corridors to limit how far it sticks out.
Flush with the wall face with a trim flange. Needs full stud depth in the framed opening.
No visible trim — drywall finishes right to the door for a clean architectural look.
Required when a recessed or semi-recessed cabinet penetrates a rated wall. We match the cabinet's listing to the wall's hour rating.
Clear or tempered glass, acrylic, bubble, break-glass, solid panel or full-glass doors, with lettering in your choice of style and color.
Locking cabinets with break-glass access, door alarms, signage and projecting ID signs, plus extinguisher brackets for non-cabinet locations.
Share the Division 10 spec, fire-life-safety sheets or a cabinet schedule. Partial sets are fine for budgeting.
We count locations, confirm mounting and ratings, and price the basis-of-design product plus any approved equals.
Submittal package to your team, then cabinets delivered to site on your rough-in schedule.
After finishes, we set Amerex extinguishers, tag each unit and hand you documentation for the final.
Quick reference for layout. Your approved plans and local fire authority always govern.
Under NFPA 10, Class A extinguishers are placed so travel distance to one is no more than 75 feet.
For extinguishers 40 lb and under, the top can be no higher than 5 ft above the floor, and the bottom at least 4 in. above it.
ADA and CBC Chapter 11B limit wall projections in circulation paths and set reach ranges, which often decides semi-recessed vs. surface.
General guidance only — not a substitute for the project's code analysis or the fire authority having jurisdiction.
